Page 1 of 1
How much air in rear Marzocchi shocks for Pantahs
Posted: Wed Feb 13, 2008 2:33 am
by Panta600
Folks,
could anybody supply information on how much air (max.) is required in Marzocchi rear shockers for a Pantah?
Please advise.
Thanks,
Steve
Posted: Wed Feb 13, 2008 7:10 pm
by David Frith
Hi,
I believe marzochhi stradas take 28 lbs. This should be on the sticker around the valve.
Cheers
Dave
Posted: Thu Feb 14, 2008 7:25 pm
by MartinMille BANNED
Dont they have gas in them and not air?
Posted: Thu Feb 14, 2008 9:20 pm
by garryc
i always used a hand pump otherwise it is easy to put in far too much
Posted: Mon Mar 03, 2008 8:49 am
by Lumpy
I use a hand pump to pump it up a little too hard. Then check pressure with a digital pressure gauge, then check it again. This will give you the amount of air that escapes when you check it. Add that amount to the 28psi and thats the pressure you should aim for. Theoretically that should bring it to 28psi AFTER you`ve checked it. Works on mine.