<-=- Club Bevel Heaven -=->

Reproduction homologation plates are not available for my 1985 Mille S2. I'm in the early stages of a restoration and am wondering if anyone has had the experience of painting a frame with the homologation plate still installed on the bike? For that matter, the same question applies to the Nieman fork lock.

I don't want to risk damaging either item while trying to remove them to paint the chassis.

Since I have little experience with paint or what a skilled paint shop is capable of, I thought I'd solicit opinions here.

Appreciate your thoughts.

Thanks,
Herb...

Hi Herb,

A competent paint shop will be able to mask both and re-paint the frame without you or anyone else being able to see the difference.

An incompetent paint shop, on the other hand ...

If you're in the States, call Steve (the owner of this site). He knows his way around a paint gun and should be able to advise.

Thanks for the tip.

I reside in Canada so I'll have to find a competent shop here in Southern Ontario. I'm glad that you think a skilled painter can
work around these "obstacles". I always thought I would have to strip the frame completely bare before painting.

Cheers,
Herb...

I have new neiman locks with keys

https://store.bevelheaven.com/Chassis-S ... -NOS-unit/



I did a writeup on how to remove the lock on my biz FB page in the 1977 Ducati 900 Restoration photo album. It's easy if you know how.