Page 1 of 1
Darmah dash connector / plug
Posted: Mon Jul 02, 2012 12:07 pm
by MitchB
Does anyone know of a source for the plastic multi-pin connector from the dash to the wiring harness?
I'd like to fabricate a new smaller dash (idiot lights and ignition key)and be able plug straight into the existing harness plug.
Re: Darmah dash connector / plug
Posted: Mon Jul 02, 2012 6:10 pm
by wdietz186
I've found the connectors at Radio Shack. You have to look in the component drawers once you get past all the toys,phones,and batteries etc.
Re: Darmah dash connector / plug
Posted: Mon Jul 02, 2012 6:57 pm
by MitchB
So I'm clear -
Not looking for the metal-to-metal connector / pins. I have found a source for those. I need the actual plug.
Hopefully the foto will work...
Note the non-flat edge on one side?
Re: Darmah dash connector / plug
Posted: Tue Jul 03, 2012 12:14 am
by BevHevSteve
it's a MOLEX connector so google that to find suppliers
Re: Darmah dash connector / plug
Posted: Tue Jul 03, 2012 1:07 pm
by swooshdave
Re: Darmah dash connector / plug
Posted: Tue Jul 03, 2012 4:21 pm
by MitchB
Thank you swooshDave.
Looks like an easy solution there. ^>^
