Page 1 of 1
250 n/c top end rebuid
Posted: Fri Feb 13, 2009 9:07 am
by richied46z
Hi guys, I'm rebuiding a 250 n/c. The rings were stuck, the the piston and bore seem ok. It has a 74.6 Borgo(sp) piston. Were can I get rings for it? And what shop do you recomend I buy parts from? I need the usual stuff to get this little gem back on the road. The crank looks to have been rebuilt already and seems tight.
Rich Dominguez
Posted: Sun Feb 15, 2009 2:57 am
by Chris Bushell
Rings are available from phil HItchcock
[email protected]
Posted: Fri Feb 20, 2009 4:43 am
by Eldert
E Bay seller gio655 has 74.6 piston rings listed on his website
the differend type Borgo pistons ( forged or cast ) have differend hight pistonrings so measure your rings before you order
the cast pistons have 2 oilcontrol rings where the forged pistons have one
Eldert
Domi-racer
Posted: Wed Mar 04, 2009 8:17 am
by richied46z
I talked to Kevin at Domi-racer yesterday and they had the rings I needed. I'm rebuilding two customer engines and I needed 74.6 and 75.0 piston rings. They also had the 31.5 fork seals I needed.
BTW Steve I checked your e-store and I will be buying one of your batteries and more than a few of those rubber parts.
Rich- up to my knees with Ducati single rebuilds.