<-=- Club Bevel Heaven -=->

G'day folks,
I'm sure someone can help me here. '77 750 ss, okay not exactly a roundcase but all I'm chasing is torque settings for the SS.the workshop manual has very minimal stats and does not cover the area I'm working on- rear sprocket-just at the moment, or is there some general settings for bolt and nut sizes that I can refer to ?
Appreciate any help. X.

Hey X,
Some general settings for bolt sizes would be:
6mm bolt 0.8-1kg/m (5.78-7.23 ft lbs)
8mm bolt 1.5-2kg/m (10.8-14.5 ft lbs)
10mm bolt 2-2.5kg/m (14.5-18 ft lbs)
Remember that sprocket bolts don't have to be super tight. They just have to stay tight. (mild thread locker)
Hope this helps,
Dean

Dean,
thanks mate, appreciate your response.

Good to see someone who likes the late, Great Hunter S.
My favourite saying- When the going gets wierd, the wierd turn pro!

X