<-=- Club Bevel Heaven -=->

Posted: **Mon Sep 29, 2008 9:51 pm**

Here is a pic of the pattern prototype to make new rear caliper hangers for the 750SS or anyone wanting to convert to rear disk using 229mm disk and Brembo caliper. Many thanks again to conti-mental for the pattern tracing. I will post more pics after I get the first one made and fitted. Jordan

Posted: **Mon Sep 29, 2008 11:12 pm**

Looking good so far and yes please

Posted: **Tue Sep 30, 2008 2:31 am**

looks like brembo above swing arm carrier. what about 74 style below s/a carrier

Posted: **Tue Sep 30, 2008 10:50 am**

The under mount used Lockheed caliper and master cylinder. I decided to go with the Brembo setup because of cost and availabiolity of parts vs. Lockheed.

Posted: **Wed Oct 15, 2008 12:07 am**

Took my wheels of the new bike today and compared the rear mount and it is much shorter than the normal SD MHR etc from the axle hole upward might even give it a trim

Do you want a tracing of this one as well ???

Posted: **Wed Oct 15, 2008 1:51 am**

looks like one is for 229 disc & other for 280 ?

Posted: **Wed Oct 15, 2008 1:54 am**

my original ss carrier (229) is exactly like the 1 on the left

Posted: **Wed Oct 15, 2008 10:03 am**

Hey Martin, if it isn;t too much to ask, would you please accurately trace BOTH of these, and note which one is off which model etc. Also note the thickness of the material and send it to me please? I will be able to then FAX the info or send the info to future customers asking about this stuff.

Steve Allen c/o Bevel Heaven
PO Box 340
Concord CA. 94522-0340

I will reimburse your postage etc.

Posted: **Wed Oct 15, 2008 11:03 am**

Martin, if you could send me a copy of the tracing too that would be great. Will pm my postal info. Thanks, Jordan

Posted: **Wed Oct 15, 2008 11:17 am**

Jordan, Martin is overseas, I can get you the stuff easily once I have it so he doesn;t have to send 2 packets.........

Posted: **Thu Oct 16, 2008 2:41 am**

No great deal for me to send two letter to the US

Will do it in the morning
dont worry about postage , be what $2 each at the most , I think I can handle that

also here is one for sale on Fleebay
http://cgi.ebay.com.au/DUCATI-Koenigswe ... dZViewItem

Posted: **Thu Oct 16, 2008 4:24 am**

Thanks Martin, somehow that didn't come up on my searches. I might have to bid on that, which means if I don't win, its going to cost someone dearly

Posted: **Thu Oct 16, 2008 4:58 am**

Here is another one, I will have this one next week its for a 280mm as well
If you want that one as well you'll have to wait till then just let me know before tonight your time

You sure don't see many Strada shocks any more do you but this bike has them

Posted: **Thu Oct 16, 2008 9:31 am**

Martin my plan is to have all the various styles drawn out and available for anyone so YES please trace that one too. thanks

Posted: **Thu Oct 16, 2008 1:59 pm**

Steve, I have that bracket loose if you want to inspect in person some day. There are some details that you won't get from a tracing. What would be really great is to have auto-cad or similar drawing available to download, that way the part could be made by anyone on a cnc or flowjet or fabricated by hand. Is that what you had in mind? I would be interested in collaborating on such a project, let me know. Jordan

<-=- Club Bevel Heaven -=->

750SS REAR CALIPER HANGER

750SS REAR CALIPER HANGER

disc hanger