<-=- Club Bevel Heaven -=->

Posted: **Sun Dec 23, 2007 7:22 pm**

hi all,looking for length measurement of threaded ends on rear axle to suit 900ss,mhr,s2
thanks derek

Posted: **Mon Dec 24, 2007 12:12 pm**

336mm overal length
25mm threaded on each end

Posted: **Wed Dec 26, 2007 11:09 am**

thanks steve,would i be correct in assuming that if i have a rear axle that
is approx 20 mm shorter and less threads this would be suitable for
early darmah/ssd setup
regards derek
ps this is not fitted to my bike

Posted: **Wed Dec 26, 2007 11:14 am**

no, all bevel twins with a disk brake use the same axle. WHat I measured is for disk brake twins.

<-=- Club Bevel Heaven -=->

rear axle length

rear axle length