Page 1 of 1
Rear master cylinder
Posted: Thu May 12, 2022 4:03 pm
by Manny59
Hello all,
Can anyone tell me the how to check/measure the rear master cylinder to see if its a 12 or 15mm in size.
Currently fitted to a whaletail Darmah.
Just want to either kit it or get a whole new unit if kit and reservoir is not available.
Thanks in advance.
Re: Rear master cylinder
Posted: Fri May 13, 2022 9:17 pm
by 81mhr900ss
The front and rear should both be 15mm; same rebuild kits for both master cylinders. Part no. 079539739
Re: Rear master cylinder
Posted: Tue May 17, 2022 9:47 pm
by Manny59
Ok thanks , my master cylinder has a screw on type reservoir , not sure if that is a telltale for the size of the MC.
Excuse the ignorance , it’s just that I was told by 2 experience Ducati mechanics that it is a 12mm MC.
Re: Rear master cylinder
Posted: Thu May 19, 2022 9:28 pm
by 81mhr900ss
Re: Rear master cylinder
Posted: Fri May 20, 2022 2:15 pm
by BevHevSteve
if its the factory MC then it is in fact the same bore as the front and uses the same kit. Yes there are identical units out there that are 12mm found on some PANTAH bikes.
Re: Rear master cylinder
Posted: Fri May 20, 2022 2:15 pm
by BevHevSteve
if its the factory MC then it is in fact the same bore as the front and uses the same kit. Yes there are identical units out there that are 12mm found on some PANTAH bikes.