For Sale: Narrow case engine stand adapter
Posted: Tue Jul 09, 2013 12:25 pm
need to make some space in the garage. thinking of selling off my automotive engine stand (that I've used twice in 25 years)for beer money. That leaves me with nothing to hold the adapter I made over ten years ago (and used twice). Hoping to get a bit more than just beer money. $75 shipped in the lower 48 States. this is for just the adapter, not the complete engine stand.
OD of the spindle = 2.42"/61.4 mm
length of spindle = 5.25"/133 mm
when I made the spindle, I found a weld seam in the stand's tube that I had to grind out. this is probably common to any stand not home made of seamless tubing. note again, it will only work with narrow case engines.
OD of the spindle = 2.42"/61.4 mm
length of spindle = 5.25"/133 mm
when I made the spindle, I found a weld seam in the stand's tube that I had to grind out. this is probably common to any stand not home made of seamless tubing. note again, it will only work with narrow case engines.