Desmoconversion of non Desmoheads

If you need technical information or help with your BOSCH ignition squarecase Ducati 900SS - Darmah engine - post your FAQs, comments & questions here.
Post Reply
hedton
Diana
Posts: 71
Joined: Mon May 14, 2007 1:47 am

Desmoconversion of non Desmoheads

Post by hedton »

Desmoconversion of Gts heads. The holes are 10mm in diameter 10mm H7= 10.00-10.018mm. And they are 89mm deep. Predrill with a center drill then a 6 or 8mm drill and then a 9.7mm drill and then use a 10mm H7 reamer. The holes are X=35mm, (both ways) Y=11mm (both ways). Zero is the camcenter with the openrockerholes in line.
desmokovertering2.jpg
hedton
Diana
Posts: 71
Joined: Mon May 14, 2007 1:47 am

Re: Desmoconversion of non Desmoheads

Post by hedton »

Here is a drawing
Desmokoordinater.jpg
Post Reply

Return to “Squarecase BOSCH Ignition Engines > SD, SSD Darmah, late 900 SS & 900 GTS”