Goldline brake Callipers

If you need technical information or help with your BOSCH ignition squarecase Ducati 900SS - Darmah engine - post your FAQs, comments & questions here.
Post Reply
Andrew62
Cucciolo - the Lil Pup
Posts: 8
Joined: Fri Dec 12, 2014 1:13 pm
Location: Sydney Australia

Goldline brake Callipers

Post by Andrew62 »

I have a set of gold line calipers that i want to restore, does anybody know where i can get them re-anodised???
User avatar
BevHevSteve
SITE OWNER
SITE OWNER
Posts: 2323
Joined: Wed Mar 10, 2004 8:53 pm
Location: Lafayette, California
Contact:

Re: Goldline brake Callipers

Post by BevHevSteve »

Might be a good idea to say where on the planet you are
Image
Steve Allen (925)798-BEVL[2385] Ride'm, Don't Hide'm
Ducati/Euro Spares -> https://Store.BevelHeaven.com
Andrew62
Cucciolo - the Lil Pup
Posts: 8
Joined: Fri Dec 12, 2014 1:13 pm
Location: Sydney Australia

Re: Goldline brake Callipers

Post by Andrew62 »

Oops. Im located in Sydney Australia however i would be happy to ship the calipers if there is somebody recomended??
Blacklightning
Diana
Posts: 63
Joined: Tue Oct 18, 2011 1:35 pm
Location: Gerrards Cross

Re: Goldline brake Callipers

Post by Blacklightning »

Andrew,

I', no expert but when I came to restore a 1979 900 Replica with goldlines I was advised against re-anodising as the porosity of the casting would make this difficult to achieve a even colour,

I used Camcoat here in the UK for a specilaist coating which is brake fluid resistant and Peter there did me a great colour match having first done a sample on a piece of alloy.

Highly recommended but not cheap - would have been less money to buy new goldlines which are available.

Stuart
Post Reply

Return to “Squarecase BOSCH Ignition Engines > SD, SSD Darmah, late 900 SS & 900 GTS”