Piston Rings 86.4mm
Piston Rings 86.4mm
Does anybody know where I can buy GENUINE Ducati rings at 86.4mm. I have tried the ones here in Australia in a white box with pale blue DUCATI printed on them and they just use oil. The oil scapers appear to be way to tensile. Thanks guys.
The older we get, the more toys we collect!!!
-
- BANNED
- Posts: 766
- Joined: Fri Sep 21, 2007 8:15 pm
Piston Rings
Thanks to Martin I have some rings, BUT, I notice no replies from overseas....you folk must rebuild these engines to, so as a matter of interest what do you use for rings???....what brand???...where do you purchase them???.....do you have supply problems???? Thanks
The older we get, the more toys we collect!!!
On this side of the world rings just don't ever seem to wear. Must have something to do with the magnetic flux of the earths poles.On the serious side rings are made by many companys to any size you can imagine. A good machine shop that does engine reconditioning will have catalogs from Hastings or Deves and the rings are listed by diameter and thickness. On my bevels the pistons have been beaten to death and I've never been able to just replace the rings. Most of the replacements have been Wiseco or JE and they supply the rings with the piston.
Piston Rings
Well looks like there is only one person outside Australia that has rebuilt a bevel engine, you have to be kidding guys!!!!...I find it unbelievable that no-one else has EVER put a set of rings in...come on, share your information so that everyone else can easily source parts....or is it just us Aussies that freely devulge info????
And yes, I am like a blue healer onto a beast, I will eventually wear you down!!!!
And yes, I am like a blue healer onto a beast, I will eventually wear you down!!!!
The older we get, the more toys we collect!!!
Piston rings
Well 232 views of this post, and still none of you have bought a set of piston rings........fair dinkum guys, it must be our Aussie air that wears these things out, and Wdietz186 just beats his to death....so that makes about 4 of us here who have ever purchased piston rings.......Do any of you non aussies know what a blue healer is?...I have the same determination!!!!
The older we get, the more toys we collect!!!
-
- BLABBERMOUTH
- Posts: 672
- Joined: Tue Sep 09, 2008 1:15 am
- Location: Adelaide S.A.
-
- BANNED
- Posts: 766
- Joined: Fri Sep 21, 2007 8:15 pm
-
- BLABBERMOUTH
- Posts: 672
- Joined: Tue Sep 09, 2008 1:15 am
- Location: Adelaide S.A.
Piston Rings
Steve, some good aussie sarcasm, love it......but seriously, I am just curious as to what other people use for rings and where they source them. I am amazed that no-one else wants to share information where and what they use apart from us few here on this thread. If this was on the Blackbird site I would have had many replies, but then again they are mostly all aussies.
The older we get, the more toys we collect!!!
Grover, I was rooting through my piles of old parts[ I'm a packrat at heart] and found an 86mm piston.It is made by AE which stands for Associated Engineers it is/was a supplier to many manufacturers. I probably have some 86.4 's in there somewhere. When I was racing my 900 in the production class I would replace the pistons every season due to skirt scuffing. I can send you some slightly used rings if you want them. Later I started using Wiseco pistons and they used thinner rings than the stock pistons. I remember looking through Wisecos catalog and seeing rings listed by size. All you really need is the ring width and diameter plus the style top ring you desire. I've also used Total Seal gapless rings in my belt 900 and been very impressed with the performance gain. They also list rings by size and can help with application if you are unsure of what you need. Hope this helps,Bill
Piston Rings
See, now there is some sensible feedback....thanks for the offer of rings, Martin has helped me out there. Interesting what you say about gapless rings, the Ducati guy that rebuilt my gearbox is at the moment trialling a set. He has been rebuilding Dukes for 20 years and he has not been able to match a set of rings from the automotive market to suit 86.4mm pistons. The spares guys I work with have all the books you talk about...aussie versions of course...and they havent come up with anything either. Thats what I keep pushing this topic for, to get people talking about what they use, brands, part numbers etc....it eventually makes it easier for everyone who owns a bevel engine.
The older we get, the more toys we collect!!!
- BevHevSteve
- SITE OWNER
- Posts: 2327
- Joined: Wed Mar 10, 2004 8:53 pm
- Location: Lafayette, California
- Contact:
Re: Piston Rings
www.deves.com for rings to fit your DucatiGrover wrote:Thanks to Martin I have some rings, BUT, I notice no replies from overseas....you folk must rebuild these engines to, so as a matter of interest what do you use for rings???....what brand???...where do you purchase them???.....do you have supply problems???? Thanks
Steve Allen (925)798-BEVL[2385] Ride'm, Don't Hide'm
Ducati/Euro Spares -> https://Store.BevelHeaven.com