Removing stator from side cover

If you need technical information or help with your roundcase Ducati 750 engine - post your FAQs, comments & questions here.
Post Reply
User avatar
rightsideup
Cucciolo - the Lil Pup
Posts: 21
Joined: Sun Oct 31, 2010 12:54 pm
Location: Devon, UK, Europe

Removing stator from side cover

Post by rightsideup »

Having undone the 4 retaining bolts and removed the washers and triangular plates I've found that the original stator doesn't want to move.
Before I inflict untold damage I thought I'd ask the collective the best way to go about the job, puller, heat, witchcraft?
Thanks.
'74 Ducati 750GT | '78 MZ TS250/1 | '97 Honda VFR750
In the high latitudes of Finland, in the parching heat of Africa, under the most different operating conditions these motor-cycles run to the satisfaction of their owners.
wdietz186
Cagiva Alazzura
Posts: 707
Joined: Sun Sep 10, 2006 5:40 pm

Re: Removing stator from side cover

Post by wdietz186 »

Heat the cover a bit, and try slamming the cover stator side down flat on a wood surface to jar it loose. Some stators are a tight fit in the cover and require coaxing to come out.
Post Reply

Return to “Roundcase Engines > 750 GT, 750 Sport & 750 Super Sport”