Pistal Forged Piston Clearance

If you need technical information or help with your roundcase Ducati 750 engine - post your FAQs, comments & questions here.
Post Reply
parrisjr
Cucciolo - the Lil Pup
Posts: 3
Joined: Tue Oct 18, 2022 2:21 pm

Pistal Forged Piston Clearance

Post by parrisjr »

Looking for information on what the clearances (minimum and maximum) should be for piston to cylinder bore for newly fitted Pistal forged pistons on a 1972 750 GT
boobby
Cucciolo - the Lil Pup
Posts: 4
Joined: Thu Jul 22, 2021 11:59 am

Re: Pistal Forged Piston Clearance

Post by boobby »

hey! are they the sport style or the standard style? and is it a street bike or a race bike?
parrisjr
Cucciolo - the Lil Pup
Posts: 3
Joined: Tue Oct 18, 2022 2:21 pm

Re: Pistal Forged Piston Clearance

Post by parrisjr »

Standard pistons in a street bike.

I found some information that stated a clearance of 0.06 mm or 0.0023”. Just not sure this is correct.
boobby
Cucciolo - the Lil Pup
Posts: 4
Joined: Thu Jul 22, 2021 11:59 am

Re: Pistal Forged Piston Clearance

Post by boobby »

i just did some pistal 750 sport pistons, i believe i did .004 with those if i remember correctly
i am not responsible for a seized piston if you go with my spec though!!
Post Reply

Return to “Roundcase Engines > 750 GT, 750 Sport & 750 Super Sport”