Flywheel Removal Help

Post your general FAQs, comments & questions regarding all Ducati engine & transmission restoration here. [Specific engine FAQs should go in the 'BevelHeaven Garage' section.]
Post Reply
Mayday1965
Cucciolo - the Lil Pup
Posts: 6
Joined: Thu Oct 04, 2018 7:07 pm

Flywheel Removal Help

Post by Mayday1965 »

I need help...what are the ways to safely remove flywheel on 1965 Ducati Monza 250 (part 400/450 in spare parts manual, page 24/26)?
User avatar
Craig in France
Paso 906
Posts: 972
Joined: Tue Mar 23, 2004 3:58 pm
Location: Montpellier, France

Re: Flywheel Removal Help

Post by Craig in France »

Hi and Welcome to the Forum.

You HAVE to use the right puller - and even then it might need some heat and persuasion. These pullers seem to be not so easy to find these days; but go, for example:
https://store.bevelheaven.com/Tools/Mag ... C-Singles/

... and read what Steve says. Because there were 2 sizes, and you must have the right one.

P.s Steve seems to be out of stock of the small one (which is what you should have). However, Ducati Vintage have a model which fits both sizes:
http://www.ducativintagestore.eu/estrat ... i_e_larghi

HTH

Craig
Post Reply

Return to “Engine & Transmission Shop”