Magneto removal
Magneto removal
I have a 1963 not sure of the model but it has a 125cc engine and while taking it apart for a rebuild, we couldn't get the magneto bolt to come out. is it a right or left handed thread and does it need a special tool to remove it?
- BevHevSteve
- SITE OWNER
- Posts: 2327
- Joined: Wed Mar 10, 2004 8:53 pm
- Location: Lafayette, California
- Contact:
magneto
http://www.shop.bevelheaven.com/detail.aspx?ID=518
Click the link above for the right tool..... measure the magneto it is either 55mm or 62mm, I have both tools in stock.
I can;t remember the thread for the bolt, someone else will chime in soon I bet, thanks.
Steve Allen (925)798-BEVL[2385] Ride'm, Don't Hide'm
Ducati/Euro Spares -> https://Store.BevelHeaven.com
- BevHevSteve
- SITE OWNER
- Posts: 2327
- Joined: Wed Mar 10, 2004 8:53 pm
- Location: Lafayette, California
- Contact:
flywheel
the clutch holding tool can keep the engine from spinning - I stock those as well - click TOOLS to see that on my shopping cart
Steve Allen (925)798-BEVL[2385] Ride'm, Don't Hide'm
Ducati/Euro Spares -> https://Store.BevelHeaven.com