Clutch bolts how tight

If you need technical information or help with your bevel drive Ducati single cylinder engine - post your FAQs, comments & questions here.
Post Reply
Cucciolo - the Lil Pup
Posts: 4
Joined: Fri Feb 26, 2021 1:47 am

Clutch bolts how tight

Post by Andysouthampton »

put clutch back together and need to screw down the cheese head bolts onto the clutch springs, do I tighten to level with clutch top face or further compress springs. Thanks andy 350 scr
User avatar
750 GT
Posts: 156
Joined: Tue May 31, 2016 3:49 pm

Re: Clutch bolts how tight

Post by 81mhr900ss »

Your 350 clutch looks unremarkable from the drawings. Tighten all the way otherwise the bolts can work themselves loose. I've always done this progressively, like lug nuts on a car wheel. I could not find a torque setting for this job but couldn't find one form my old MHR either.
Post Reply

Return to “Single Cylinder Bevel Drive Engines > 250, 350 & 450”