I purchased a pair of mixture screws for my 900 GTS, but could not help noticing the end taper being slightly longer (about a 1mm) than the originals. Two questions, A, were they modified by a previous owner,,B, have they been changed by the manufacturer.
The screws came from a genuine Del orto supplier, any clues? The bike runs fine so far,always ran on the rich side of carburation,before changing the screws, have not checked the plugs yet.
Anyone have any thoughts?
New mixture screw, PHF 32
Re: New mixture screw, PHF 32
There are two types of Phf 32 mixture screws. One for the as/ad models and one for the later cs/cd models.
The c series have a fine cylinderical point at the end. Perhaps you have those?
Kev
The c series have a fine cylinderical point at the end. Perhaps you have those?
Kev
- BevHevSteve
- SITE OWNER
- Posts: 2327
- Joined: Wed Mar 10, 2004 8:53 pm
- Location: Lafayette, California
- Contact:
Re: New mixture screw, PHF 32
As noted above there are 2 different types, we keep both in stock of course....
22 type
https://store.bevelheaven.com/Carb-Fuel ... and-PHF/M/
23 type
https://store.bevelheaven.com/Carb-Fuel ... L-and-PHF/
Steve Allen (925)798-BEVL[2385] Ride'm, Don't Hide'm
Ducati/Euro Spares -> https://Store.BevelHeaven.com
Re: New mixture screw, PHF 32
Thanks for clearing up that mystery