Hi All,
Can anyone direct me on how to remove the piston out of the master cylinder of a brembo brake. My 73 GT has a brembo master cylinder, round reservoir. I cant see a circlip or anything around where it penetrates the housing. Any help would be great. I'll continue to find some info online.
Cheers,
Brembo Brakes 73 GT
Brembo Brakes 73 GT
'72ish 750 GT
Functional bitser
Western Australia
Functional bitser
Western Australia
- BevHevSteve
- SITE OWNER
- Posts: 2327
- Joined: Wed Mar 10, 2004 8:53 pm
- Location: Lafayette, California
- Contact:
Re: Brembo Brakes 73 GT
remove lever, remove brake hose banjo bolt, pound a drift from the banjo hole end to drive the piston out.
Complete writeup on doing the job correctly here
https://store.bevelheaven.com/Install-G ... tructions/
Complete writeup on doing the job correctly here
https://store.bevelheaven.com/Install-G ... tructions/
Steve Allen (925)798-BEVL[2385] Ride'm, Don't Hide'm
Ducati/Euro Spares -> https://Store.BevelHeaven.com
Re: Brembo Brakes 73 GT
Thanks Steve. You're pretty cluey on these Ducati's. You should start a forum!!
'72ish 750 GT
Functional bitser
Western Australia
Functional bitser
Western Australia