B6HS Obsolete --- What is non resistor substitute????

Post your 'Electrical & Gauges' FAQs, comments & questions regarding Ducati motorcycles here.
Post Reply
Tinkerbell
Mariana
Posts: 47
Joined: Sat Sep 05, 2020 3:57 am

B6HS Obsolete --- What is non resistor substitute????

Post by Tinkerbell »

Hi Everybody,
THe NGK B6HS has gone obsolete and I would like to know what a good non resistor substitute is. My wires are resistor wires and I don't want both resistor plugs and wires in the circuit... Any suggestions would be appreciated !
cheers,
Kara
User avatar
geodoc
750 GT
Posts: 182
Joined: Thu Jul 18, 2013 3:57 pm
Location: Vancouver BC Canada

Re: B6HS Obsolete --- What is non resistor substitute????

Post by geodoc »

What bike / ign. system?

I have copper wire plug leads, 5K ohm resistor caps and use BPR6HS plugs on my 750 GT w/ a Dyna-S. Been working fine for years now.

Some electronic ignitions are apparently particular though, like the Tri-Spark for Triumphs where either resistor cap or plug, but not both are recommended. No experience with the systems on later Bevels & what they work best with.


.
Post Reply

Return to “Electrical & Gauges Shop”