I took one of my headers into the local welding shop to fix a hairline crack on the lip. I needed to do this prior to sending them off to get them re chromed.
I just picked it up and here it is with the other one for comparison.
he even welded the washer:
A nice old boy that repairs boat props (amongst other things). I paid and left before I said something I'd regret later.
The one I was trying to repair had seen some abuse in the past - to the point where I was unable to slide the washer round the bend as the tube was a little distorted. So I probably should try and source another.... In the meantime I'm off to try the other welder.
Incidentally the washer does not appear in my parts book.
Someone might get a chuckle from this....
- BevHevSteve
- SITE OWNER
- Posts: 2327
- Joined: Wed Mar 10, 2004 8:53 pm
- Location: Lafayette, California
- Contact:
Re: Someone might get a chuckle from this....
bummer. i stock washers i had made up in stainless..
Steve Allen (925)798-BEVL[2385] Ride'm, Don't Hide'm
Ducati/Euro Spares -> https://Store.BevelHeaven.com
-
- Mariana
- Posts: 35
- Joined: Fri Aug 15, 2008 6:48 pm
- Location: Melbourne Australia
Re: Someone might get a chuckle from this....
Wow. I wonder if he used a mask?? Lets hope he doesn't take up watch repairs...
73 750GT
Re: Someone might get a chuckle from this....
Struth Crash,
It looks like I've welded it for you, with my 120 amp stick welder that was given to me free. I've had 2 goes at it now , once to practice, Blew the fuses, and once to weld an upright on a trailor. 2 inch horizontal weld. took me 2 hours and 2 grinding disks !
I feel I'm getting better though, so give me a call, I think I'm ready to weld some alloy cases ???
Cheers
Rick
It looks like I've welded it for you, with my 120 amp stick welder that was given to me free. I've had 2 goes at it now , once to practice, Blew the fuses, and once to weld an upright on a trailor. 2 inch horizontal weld. took me 2 hours and 2 grinding disks !
I feel I'm getting better though, so give me a call, I think I'm ready to weld some alloy cases ???
Cheers
Rick
I have desmo disease, I just hope they never find a cure !!!
Re: Someone might get a chuckle from this....
no chuckling here. you could save it with a die grinder, Dremel tool, some files, and a bunch of time. or, cut it off and (properly!!!) weld on a newly machined end.
1991 851 SP3
1966 250 Monza
1999 Monster 900
1966 250 Monza
1999 Monster 900
Re: Someone might get a chuckle from this....
I've done a few of mine like that,laid on a bit more bead and some time with a grinder it comes out fine. If it doesn't leak appearance matters little as it is hidden anyway.