Mille Clutchbasket tool
Mille Clutchbasket tool
I've made a clutchbasket tool. The inside hole is 90mm, The outer diameter is 161mm and the diameter at the bottom of the 12 teeth is 151mm and the teeth are 13.5mm wide. I locked the big nut with 100nm, the same torque as the clutchcenter since I haven't found any torque for this nut.
- BevHevSteve
- SITE OWNER
- Posts: 2325
- Joined: Wed Mar 10, 2004 8:53 pm
- Location: Lafayette, California
- Contact:
Re: Mille Clutchbasket tool
looks like it did the job.
Steve Allen (925)798-BEVL[2385] Ride'm, Don't Hide'm
Ducati/Euro Spares -> https://Store.BevelHeaven.com