Mille Clutchbasket tool

If you need technical information or help with your late dry clutch Ducati S2, MHR 900 or Mille engine - post your FAQs, comments & questions here.
Post Reply
hedton
Diana
Posts: 71
Joined: Mon May 14, 2007 1:47 am

Mille Clutchbasket tool

Post by hedton »

I've made a clutchbasket tool. The inside hole is 90mm, The outer diameter is 161mm and the diameter at the bottom of the 12 teeth is 151mm and the teeth are 13.5mm wide. I locked the big nut with 100nm, the same torque as the clutchcenter since I haven't found any torque for this nut.
Clutchtool.jpg
User avatar
BevHevSteve
SITE OWNER
SITE OWNER
Posts: 2324
Joined: Wed Mar 10, 2004 8:53 pm
Location: Lafayette, California
Contact:

Re: Mille Clutchbasket tool

Post by BevHevSteve »

looks like it did the job. :vroom:
Image
Steve Allen (925)798-BEVL[2385] Ride'm, Don't Hide'm
Ducati/Euro Spares -> https://Store.BevelHeaven.com
Post Reply

Return to “Squarecase Dry Clutch Engines > S2, MHR, 'Mille'”