<-=- Club Bevel Heaven -=->

Thanks Paddy, I did find this diagram...

http://www.ducatimeccanica.com/marzocch ... /index.htm

However, my forks don't seem to have an allen bolt on the underside of the bottom tube. I am going to pull the forks again shortly, and double check. Thanx!

Hey guys, I have a 250 scrambler, and am having issues with the forks. The spring/rebound on them is really rough. For instance if I hold the front brake and lean forward to compress the forks, they will actually 'hang' after being compressed a few inches, and I have to pull back on the bars to get ...

...thanx for the response chim...

...I was a little rusty on spoking, so it took me a bit to realize the different bends in the inner vs. outter spokes. After getting that sorted out, I was able to get the rim spoked. Its is on the truing wheel as we speek!

Not sure about your assertion about the ...

..hey guys, I have a 71 250 single that I am relacing the wheels. I have a set of spokes that I scored on the cheap, and may be having buyers remorse. :? I went out this evening and took a stab at lacing the wheel, but no luck. I am not a total noob to wheel lacing, I've done a few before, but its ...

..thanx Steve..I'll check it out!

..thanx Steve, I looked at the rear light bulb, and it looks to be 6v, so I am assuming there was no voltabe change from the stock voltage. Is/was that a common change on the duc singles...to upgrade to 12 volts?

Hey guys, I picked up a barn find, and am told this is a 450 engine in a 250 frame. I am anxious to drop a battery in it, and see what works, and if I have spark. From everything I can find the bike should be 6 volt? To complicate matters, the bike appears to have updated electrics. Is there a ...