<-=- Club Bevel Heaven -=->

Thanks for the reply Hugh, I'm in Kent.

I hope I can explain this easily....

If you look at the engine casting which the oil filter is located it is normally about 40 - 50mm high. On mine, the casting has been machined down so it is about 20mm high so a manifold ring can sit on top then a screw ...

Thanks for the reply.
I want to change the bike back to standard as i didnt like all the pipework etc.
It worked well, but prefer standard.

I just need the dimensions of the engine casting where the oil filter is located so I can change back, do you have 900ss in bits you could measure for me ...

hi, hope you can help.
I am rebuilding a 1980 900ss. it had been converted to use a screw on oil filter and had a small ring under the filter which was used to divert the oil to a filter and directly to the cam boxes.
i removed all the pipework etc and checked to see if the internal head oil ways ...

thanks for reply

does anyone have any photos of a 900ss with tank off so i can see the correct positions of the electrics?

Hi. I am rebuilding a 79/80 Black and gold 900ss. Can someone help me with some photos of the correct wiring loom location including the 2 relays which are attached near the fuse box. Also what were the correct spark plug caps, NGK?

thanks