<-=- Club Bevel Heaven -=->

Ah yep it all makes sense, will strip it down over the next couple of days. I see you're selling sprag bearings at a very good price at the moment, so will order one plus any other bits i may need (gaskets)in the next couple of days. Thanks for your help Steve

On my S2 Mille, first it was an intermitant problem but now it happens more often than not......the starter motor spins happily when asked to, but it doesn't engage with the engine. Any advice as to what could be the problem would be much appreciated.

Have made the decision to swap my bellmouths for oval K&N's for carby and engine reliablity reasons. Having got the filters, I now see on the rear cylinder I need a bend put in between the carb and the filter to make it fit in the sidecover. I have read on other posts here on this fine forum, some ...

Gowanloch Ducati came through and provided the missing pages, thanks very much anyway.
Regards, Tony

I am just about to reassemble my engine after a crankshaft overhaul only to find that pages are missing out of my workshop manual. I purchased this manual from Gowenloch Ducati in Aussie with unfortunately all of section "G" engine reassembly missing. I have made contact with them regarding the ...

On my last ride it developed a serious knock and rattle. I stripped it down only to find a lot of slop in the front big end. My mechanic informs me to get a replacment crankshaft and conrods, he doesn't recommend buiding it back up and regrinding it as it wouldn't be as reliable.
Does anyone have ...

How about Mobil 1, V-TWIN, 20W50 , I've got access to that?
If using a high grade synthetic oil, should I be able to go longer between oil changes?
Craig in France, did u get my PM ?
Is there anybody else in New Zealand with a Mille S2 ?

Regards, Tony

Thanks for that Steve, all my project pics are at "bikepics.com'' under Ducati,MHR 1000 (they don't have an S2 Mille catergory)
A question now, I put Castrol "Edge" synthetic 10/60 engine oil into it, Quite expensive, seems to work fine, do you think it has any advantages, if not really, what would ...

Hi Peter,

The engine # is 100794

Cheers, Tony

After 10 years without a motorcyle, I purchased my brothers wrecked Mille S2 in july 09 and have been rebuilding it ever since.What a wonderful thing this interweb thingy is to track down parts needed and this forum looks like a great place to talk to like minded people.I've owned over 50 bikes in ...