<-=- Club Bevel Heaven -=->

Hi.

The crankshaft is the same except for the stroke, so it is strong enough.
By the way, 15 years ago it was possible to buy a ready to mount kit.
With special barrels and pistond diam 82 the 350 became a 540.
That is what I know, the problem is to borrow a pair of 650 barrels an pistons to see if ...

Hi !

Does any one knows if it is possible to mount 650 Cagiva or Pantah cylinders and pistons diam 82 mm on a 350 engine.
I mean without a lot of machining.

Thanks.

Gerald

Hi

Does any one knows if a 350 Pantah head would fit a 600 engine after modification ?
I mean are the foundries the same overall dimensions, or are the 350 type externally smaller ?

Thanks.

Gerald

Hi guys !

I have done the same and found the same conclusion.
All that is right, the japanes filter can fit if you drill these holes and use a spacer and gasket or (better) O-ring.


Ducati Saluti !

Gerald

Hi Chris

I am not surpised !
Electrics....I spent quite a lonf time to get every thing about right...
Keep cool boy !

Gerald

Hello.

I think the GTV wiring diagram is the same:
see on my web site:

http://66.196.80.202/babelfish/translat ... 57168.html


All my best
Gerald

I have 350 and a 500 along with an extra frame and NONE of them have side stands. It does show one in the parts list. Does anyone out there have one on their bike? Have one for sale? Pics?

Jon
Hello
I have one at home in France but it suits GTL models only and it is bent because i tried to fit it ...

Hello.

I know a guy who has rebored to 80 mm an fit 600 pantah pistons.
I don't know about the pin diam and piston height but his bike runs like hell in racing.
The cylinder sleeves must be very thin, but it works...

Gé

Hi Miguelangel !

Thanks A LOT !
Marvellous !
Little by little, things appear, thanks to people like you.
I agree this 500 desmo Mototrans are very intersting bikes.
Keep on with your site, it will be good.

I will put this new links in the Mototrans page of my site, where I speak about your blog ...

Hello !
The maxi you can rebore this liners is 79 mm, if more they become too thin an it is dangerous.
And if you try different pistons you will have problems with the pin diameter and it's position (too high or too low) in the piston.
So the best is to forget that.
I have seen your pictures of ...

This a good question !
I begin to know about all the web sites and shops who sell NOS parts for these motorbikes and I have never found any piston, standard or oversize for the 500 cc.
I know that Giovanni Gentile (Classic Italian Bikes) have oversize pistons for the 350 engine, that is all.
(but ...

Superb !
Amazing how things work better with people "who know how" !
Thanks man
Gé

Hi !
Thanks a lot.
But Magaupload is not easy to use..
Cannot you try to load it on a simple format ?

Thanks

Gérald

Hi Miguelangel.

Thanks for what you say about my web site.
I am retired and it keeps me busy.
May be I have found the owner manual you are lookin for.
There is one on sale on this spanish site:
http://www.libromotor.com/libros/DUCATI-500-TWIN-INSTRUCCIONES-PARA-EL-USO-Y-ENTRETENIMIENTO/10605/

If ...

Hi.

Try with "la maneta" forum.

May be you find some infos in my web-sute:
http://www.paralleltwins.com/

Gerald