<-=- Club Bevel Heaven -=->

Try calling or emailing Phil at roadrace@connect.net.au for advice. He has some experience with roundcase bevels. phil hitchcock road and race 2 bon mace close berkeley vale nsw 2261 australia ph/fax 0243884211 international 61243884211 www.roadandrace.com.au NOTE NEW EMAIL ADDRESS roadrace@connect...

Sorry I'm joining this discussion so late. I am posting the text of two different emails I sent to two different riders at two different times a few years ago addressing this same concern. Good luck. On bevel forks the spacer (or speedo drive/washer combo) that goes between the hub and the slider o...

Look in your 750GT parts manual. Find the rear wheel assembly. Look for reference 210. It looks like a bearing shield. That is the "old" way (read: cheap way) to shield a bearing. These days we use 2RS (two rubber shields) sealed bearings in the wheels. It's not used after one replaces th...

So, whatever happened?

.

Your shift lever stub on the shift box is mounted one spline off. It should be oriented at the 12 o'clock position.

.

Vince wrote:... BUT starting suffered a bit and power is also down...

Interesting. Please post your dyno chart.

.

If I understand your post correctly you have Ceriani forks and the calipers have to be attached to the forks with long bolts and a nut. If this is the case then, technically, you have the wrong calipers. That doesn't mean that they can't be made to work. You mention that the calipers are "shim...

Any tips to how to measure the crankshaft preload without fancy instruments ? With 0,50 mm shims i can feel that the crank is a little "loose" With 0,60 mm its tight, with a minimum of drag With 0,75 mm its tighter, with more drag Which one should I go for ? 71 750 roundcase GT To do it r...

Sorry to get off the topic of how fast we all used to be, but: You may want to use a straight edge to check your sprocket alignment before simply turning around your countershaft sprocket. I had a problem with my chain clearance and checked the alignment of my sprockets. http://img.photobucket.com/...