<-=- Club Bevel Heaven -=->

I have been through six indicators on my Mille. I have found two locally and the other four from Gowanlochs in Sydney. Short front, longer rear. They were all new and they all have that dried out plastic look - all broken. Any suggestions for a replacement set - alternatives?
I guess they do not ...

Thank you

Hi there.
Have a '77 GTS that I am rebuilding. Can someone steer me in the direction of a crank re-builder. No obvious wear, but it is out of the engine and should be done.
Located in Arlington Va.
Vince

Thanks Craig, I read that too. Mine starts 854XXX. The early SDs of 1977 have Ceriani and some say that Ducati would put whatever they had on their bikes.
Vince

Need some help. I picked up a GTS with a manufacture date of 5/77. It is plated as a 1978, but it is not a Bosch engine and has the external shift on the sprocket cover.

It is missing the triple trees, but has a pair of Ceriani forks (may not be original). Two questions:
1. Does anyone know whether ...

Looking for a pair of foot pegs and linkages for a SSD. Prefer the later lower version.
Please help!!!!
Vince

Thank you all.
So the filters I had were for the 900S2 dry clutch - hence the wrong year.
I have a spare filter for my MTS in the shed so that will go on this weekend.
I may get this Mille running in the coming week. Has been sleeping since 2000.
Vince

Thanks Steve, it is a 1985 Mille S2. I think mine has had the screw in the case changed to accept later filters. Investigating this weekend. I had a Mille filter and it has about a 17-18mm screw thread. The spigot on my engine is about 12mm and the filter I removed is taller than OEM one listed for ...

Can anyone tell me the part number or source for Mille oil filters. I ordered some from the UK but the screw on thread is the wrong diameter.
Vince

Thanks gents.
I have two other bevels (Darmah and GTS - have gone down to 32s on them to make them better to ride) and lots of miscellaneous parts so will go the manual route using standard and based on your feedback and Steve's and I will also try the following (Slides are 60/1 and I cannot work ...

1985 Mille S2, 40's with cable choke, pod air filters and contis.
Bike has been sitting for 12 years and am in the process of re-commissioning. All but the carbs and interior of tank on the bike are excellent (only 12k miles). Carbs were a mess but cleaning up nicely and have some jetting questions ...

There is one on ebay now.

Jordan,
Thanks but not what I need. I may have one coming from road and race.
Vince

I have a 78 GTS900 and need some bars for it and the panel that is part of the top handlebar clamp that includes the 5 warning lights and the key. I have tried bevelheaven and desmo-ducati.de - no luck.

If anyone can point me in the right direction I would appreciate it.

Vince

Hi all,

I have a 78 900GTS that is missing the warning light panel - I think it is the one that comprises part of the handle bar clamp. Out of the ignition key/switch wiring harness I have the indidiual wires that look like they should go to each light.

I am hoping that someone can put me onto a ...