<-=- Club Bevel Heaven -=->

Okay,
after checking the muffler, carburettor and jets again, I replaced the powerfilter with the good old aluminium funnel. And it works. Still not perfect around needle jet throttle, but much better.

Now I just have to find working settings for the new carb with different kind of air cleaner ...

Muffler! That's one of things I newer suspected. There is an aftermarket muffler installed by the previuos owner. Thanks Nick for advice, I really hope that is the problem.

I've tried two carbs with different settings. I belive that even though the settings wouldn't be perfect, the engine would rev ...

Hi!

I bought my -72 450 SCR cylinder and head apart and now I'm trying to get it on the road.

Renewed parts:
- wiring (except the ones coming from the alternator)
- contact breakers (Zanussi)
- condencer
- spark plug + lead
- carburettor (PHBH 28 AS)
- gas pipes
- air filter
- gaskets

The ...

Okay,

previous owner had installed ATU the opposite it should be, no wonder I couldn't get the timing right!

Now it works with points, but I still try to get rid of them. Newtronic/Piranha might be good solution.

Thanks for all!

Antero

Terve Esa!

Thanks for the links.

Meanwhile I have been trying to get the timing right with new points but somehow it seems impossible: if I set the points cap to correct 0.30-0.40, I just cannot get the advance right.

To get the advance to 0 degrees with still engine (isn't it 0 with 450 ...

Ciao Craig!

Thank you for the advice, I'm afraid you are right.
Should have checked the stator before buying these parts...

I guess I try to manage with a new set of points and condencer and start looking for used 5-coil stator. The only trick that comes to mind is to split the wires coming from ...

Hi!

I have -72 450 Scrambler (1st serie) and I would like to get rid of the contact breaker points. I have Ducati pick-up and coil, but the problem is wiring:

In the 2nd serie wiring diagram I found (http://www.desmo-ducati.de/860E.htm second from the top) there seems to be five wires coming from ...

Hi,
I was surfing in the net and found this. Hope it helps.

http://www.culayer.com/Wiring_Looms.htm

Greetings,

Antero