Search found 2326 matches
- Wed Apr 24, 2024 11:51 am
- Forum: Roundcase Engines > 750 GT, 750 Sport & 750 Super Sport
- Topic: carb tuning for 1974 Ducati GT750
- Replies: 8
- Views: 10228
Re: carb tuning for 1974 Ducati GT750
It's probably more important to do so maintenance first before trying to 'correct' something by changing factory settings or installing a hotter plug to possibly mask the issue. My advice: 1 pull carbs, clean and replace everything soft inside. 2 replace intake manifold insulators 3 replace exhaust ...
- Mon Apr 15, 2024 8:49 pm
- Forum: Bevel Drive Twins
- Topic: SD SSD S2 Square case bevel starter motor
- Replies: 3
- Views: 127
Re: SD SSD S2 Square case bevel starter motor
your posted link goes nowhere. Can you please give it another go?
- Wed Mar 20, 2024 1:48 pm
- Forum: Squarecase BOSCH Ignition Engines > SD, SSD Darmah, late 900 SS & 900 GTS
- Topic: Smoking under acceleration - valve guides.
- Replies: 13
- Views: 13441
Re: Smoking under acceleration - valve guides.
more oil drains down into the front cylinder than can drain out. So it is typical for oil to drain down past worn guides and/or guide seals into the cylinder when you stop, and then get a bunch or smoke at startup and for a bit....
- Sun Mar 10, 2024 6:44 pm
- Forum: Single Cylinder Photo Gallery
- Topic: 1974 450 Desmo
- Replies: 1
- Views: 453
Re: 1974 450 Desmo
nice bike.....
- Thu Mar 07, 2024 6:58 am
- Forum: Carburettor & Fuel System Shop
- Topic: Choke splitter box location
- Replies: 2
- Views: 453
Re: Choke splitter box location
doesn't bolt to anything. That said on every bevel I have restored I set things up then zip tied it where I wanted it to stay (loosely).
- Tue Mar 05, 2024 12:36 pm
- Forum: Introduce Yourself
- Topic: Introduction
- Replies: 1
- Views: 469
Re: Introduction
Welcome aboard
- Sun Mar 03, 2024 9:34 am
- Forum: Squarecase BOSCH Ignition Engines > SD, SSD Darmah, late 900 SS & 900 GTS
- Topic: Desmo Valve Timing
- Replies: 14
- Views: 604
Re: Desmo Valve Timing
and always remember that the crankshaft turns in the opposite direction that your wheels do when driving down the road...
- Thu Feb 29, 2024 1:42 pm
- Forum: Carburettor & Fuel System Shop
- Topic: 750 Sport rear inlet manifold
- Replies: 2
- Views: 235
Re: 750 Sport rear inlet manifold
how do you want it measured? Around the outside of the bend? From where the flat contacts the rubber intake manifold or to also include the extended bit that sits inside the intake manifold insulator?
- Tue Feb 27, 2024 3:01 pm
- Forum: Bevel Head Twins Photo Gallery
- Topic: 1981 Ducati 900ss Restoration
- Replies: 1
- Views: 500
Re: 1981 Ducati 900ss Restoration
nice bike - even nicer that it was your pop's bike....
- Tue Feb 27, 2024 2:59 pm
- Forum: Squarecase BOSCH Ignition Engines > SD, SSD Darmah, late 900 SS & 900 GTS
- Topic: Desmo Valve Timing
- Replies: 14
- Views: 604
Re: Desmo Valve Timing
^ thats a great read ^
- Tue Feb 27, 2024 2:10 pm
- Forum: Introduce Yourself
- Topic: Old chap from Belgium
- Replies: 1
- Views: 286
Re: Old chap from Belgium
wow - fantastic story and fantastic bike, Serge. Welcome aboard, thanks for joining.
- Tue Feb 20, 2024 9:19 am
- Forum: 'Reverse Head' Pantah Engines [rear exhaust faces rearward] > Indiana, Elefant, Paso 350/750, 750 Sport & SS, Monster 600/750
- Topic: 900 Pantah
- Replies: 1
- Views: 536
Re: 900 Pantah
Sounds like it's going to be a fun project with all the power in that 900..... Once you get things ironed out. What calipers do you have up front on that Pantah? F05 or F08? You may need to upgrade those brakes either way. Let me know what you have and I will help you out with doable options.
- Sun Feb 18, 2024 2:27 pm
- Forum: Introduce Yourself
- Topic: new member
- Replies: 1
- Views: 200
Re: new member
welcome aboard
- Sat Feb 17, 2024 2:52 pm
- Forum: Introduce Yourself
- Topic: new member: 750gt 1973 Akld NZ
- Replies: 1
- Views: 216
Re: new member: 750gt 1973 Akld NZ
awesome - have fun with your new project
- Fri Feb 16, 2024 3:51 pm
- Forum: Introduce Yourself
- Topic: Hello, newbie from Orlando
- Replies: 1
- Views: 197
Re: Hello, newbie from Orlando
welcome aboard