<-=- Club Bevel Heaven -=->

I have some parts I am looking to get rid of. Make me an offer and pay for shipping and they are yours. Nothing show quality, but maybe what you need to get running.

Brake cable with switch NOS 0789.54.980 never used
Mototrans instrument cluster. Tach is broken. Holder is cracked but usable. Extra ...

I am selling my 1972 Mototrans 350. I have replaced all the rubber pieces as everything was dried out when I purchased the bike several years ago. This includes fork and shock seals. It runs well but is difficult to start when cold. Once warm, it will start with one kick. A previous owner had ...

I also have a Mototrans 350. I don't ride it a lot, but I have not had to touch the electronic ignition in the three years I have owned it. The bike is hard to start when cold, but fires on the first kick once it is warm.

Pete

The density of magnesium is approximately 2/3 that of aluminum.

Pete

edit: fixed wording

That one should have had electronic ignition stock. I have heard some complaints about them but mine works okay.

Pete

Glad I could help. If it ever stops snowing, I will pull the carb for a little maintenance. I will double check the jets and slide number then.

Pete

My Mototrans 350 has an Amal 930 fitted as stock. My owners booklet lists the jets as follows:

Atomizer 106 I think this is the needle jet
Diffuser 27
Main jet 250
Idling jet 25 I think this is the pilot jet


You can go here to find out everything you wanted to know about Amal carbs. http://www ...

Very nice. Looks better than new.

Pete

Here are a couple of photos of my Mototrans 350 Road

http://i35.photobucket.com/albums/d152/pengel2004/Ducati/100_3037.jpg

http://i35.photobucket.com/albums/d152/pengel2004/Ducati/100_3044.jpg

http://i35.photobucket.com/albums/d152/pengel2004/Ducati/100_3045.jpg

http://i35.photobucket.com ...

The engine could be Mototrans with the ignition replaced. My Mototrans bike says Made in Italy on the right cover. The small oval cover on the left has the Made in Italy removed. Mototrans bikes have a fiber gear for the oil pump instead of steel like the Italian bikes. The finning on the head is ...

I don't think I would use that method on the piston. Most of the electrolytes described are alkaline which could cause a lot of damage to the aluminum piston. Check out Tom Bailey's book ( available from Steve's store ) for info on freeing stuck pistons.

Pete

Hi Nate,

Can you post some pictures? We would love to see what you have.

Pete

That's looking good so far. I can't wait to see it complete.

Can you post some pictures of the engine? The cc's should be marked on the cam bearing cap. Is there another number on the opposite case like DM250?