<-=- Club Bevel Heaven -=->

should i port the head, when using a larger carb?

thanks, i'll let you know how it turn out.

PO kreemed inside gas tank. not very well. starting to peel.
how can i remove it and start over?

can anyone tell me what the size of the bolts for mounting the tank on singles.
8mm or 10 mm diameter.

thank you oh great one.
for i would be lost.

but its still a better option then an old one, right?
also i haven't decided weather or not i'm going to run a 250 or 350.
would a 30mm be ok for a 250 monza?

it's already become apparent to me i will not be making an original Ducati single.
so why not buy a brand new 28mm Dell Orto carburetor?

will 35mm cerani forks fit in to a 35mm ducati triple tree
and still have the same spacing for the front wheel? or will i need to get a spacer?

what are the inner demensions between a set of 750 860 900 forks?
i have a crown and can't figure out what bike it's for.
definently ducati.
about 150mm.

i'm going with a monza engine and scrambler frame.
cerani forks.
after market controls and other bits here and there.
akront rear rim
giuliari seat, who cares ducati thumpin' unnder you...

yes it is.
ceraini forks and all.
here's a question.
are the narrow cases from the 160 to the 350 the same mounting demensions?

ok so i bought a basket case over the weekend.
250 narrow case frame
wheels
electrics
ceriani road race forks
narrow case bottom end

no frame numbers. i asume the plate was removed for painting once upon a time.
the interesting thing about the numbers stamped on the motor...
there is only a 87500 ...

so i won an auction on line for a rear wheel. can an axle be made for the 350 rear wheel?

should i just have a machine shop make me one?
what grade of steel should i use? and inner diameter?

so i just got a scrambler frame and no swing arm axel. found some on line, and was wondering are they all the same size and length? the swing arm i have is the one that goes inside the frame. the locking bolts are on the frame not the swing arm.