<-=- Club Bevel Heaven -=->

Hi All
I’m hoping that someone here has installed the ELECTROSPORT ESR510 voltage regulator on an 1981 900 SS. I’ve wired it according to the diagram provided. Green wire to the neg battery post, Red fused wire to the plus side of the battery, two yellow wires to the two stator output wires, white ...

Hi All
I’m hoping that someone here has installed the ELECTROSPORT ESR510 voltage regulator on an 1981 900 SS. I’ve wired it according to the diagram provided. Green wire to the neg battery post, Red fused wire to the plus side of the battery, two yellow wires to the two stator output wires, white ...

So my neutral light stopped working so I went looking under the cover. Switch was total frozen and inoperative. Found a new one and have run into the most confounding thing. The old one measures .230 so its 6 mm and the thread is either .80 or .75. The new one measures exactly .250 so 1/4' and what ...

Thanks Steve

Hi All
I thinking that this winter I will have my 1981 900 SS frame powder coated. The question that I have is whether or not the engine can be dropped out of the frame in it's whole condition. Anybody have any first hand experience doing this? Thanks

Spark

Anyone out there know if the bevel 900 SS came with resistor spark plug caps ....1K or 5K? My memory tells me that they came with KLG non resistor rubber types. Thanks

Since the last conversation some time ago, it is my understanding that one of the differences between the PHM A and PHM B carb is that the B has a larger Venturi. It is my understanding that smaller venturi’s require smaller jets and conversely larger Venturi’s require larger jets, so I am confused ...

Hi
I'm curious what others here use for jetting in Dellorto 32 MM PHF A D/S carbs for the 900 SS bevel. Thanks

Update. Mains are 152. Needle is K4, slide is a 60/3

Hi,
I started my 1981 900 SS yesterday. It hadn't been started in some time. It fired right up but I noticed that just off of idle, once the choke had been released, that it was sort of hesitating and coughing.In order to stop it I had to engage the choke again. It sounded like the front cylinder ...

Hi
Anybody know if the Dharma or GTS rear axle is the same as a 900 SS?

Hi '
Anybody know if the 6mm stud coming out off the breather labyrinth is threaded or glued? Thanks

What should be the pilot and main jet size for a 1981 900 SS that is stock and has 40 MM carbs with choke circuit

I have been meaning to ask this question since early in the Spring here in the Northeast. Whenever I fire up my 1980 900 SS in cool weather, I notice that upon acceleration of the carbs that the engine coughs. Sort of like a mutted backfire through the carbs. I have to thoroughly warm the engine for ...