I've just finished rebuilding it.

Post pictures of your twin cylinder Bevel Drive Ducati (pre-1985) along with a description here.
Post Reply
User avatar
Colin Linz
Diana
Posts: 54
Joined: Fri Jun 18, 2004 6:16 pm
Location: Brisbane, Australia
Contact:

I've just finished rebuilding it.

Post by Colin Linz »

I made the mistake of dropping my bike last year, so it’s been out of action for a while. I had to strip all the bodywork off and repair and paint it, make some new foot pegs and controls and change the left crank case cover. I thought I would take the opportunity to give the engine a freshen up and fit new pistons, rings and seals throughout. I also had a couple of desmo heads in the workshop so I thought I would throw them on too. This required me to alter the manifold stud spacing so my 40mm carbs and manifolds would fit. I also took the opportunity to rebuild the forks, get rid of the front guard studs and fit bolts and change the forks around so the callipers are on the other side, as is the modern convention.

It used to be all red, but now it has black with red pearl bodywork and the frame hasn’t changed. The motor was silver, but I changed it to black, as I thought it would look better. It still needs some more tidying up, but at least it is ridable now.
Image
Image
Cheers
Colin Linz
User avatar
BevHevSteve
SITE OWNER
SITE OWNER
Posts: 2323
Joined: Wed Mar 10, 2004 8:53 pm
Location: Lafayette, California
Contact:

viva La Ducati

Post by BevHevSteve »

Hey Colin - LOOKS GOOD! Thanks for sharing your photos
Image
Steve Allen (925)798-BEVL[2385] Ride'm, Don't Hide'm
Ducati/Euro Spares -> https://Store.BevelHeaven.com
darren nix
Diana
Posts: 66
Joined: Sat Dec 04, 2004 1:40 am
Location: sunshine coast queensland

cols rebuild

Post by darren nix »

great job on the rebuild, looks light and quick and if whats been done you did in house that makes it even more special to look at . Try and catch up one of these days.
User avatar
Colin Linz
Diana
Posts: 54
Joined: Fri Jun 18, 2004 6:16 pm
Location: Brisbane, Australia
Contact:

Post by Colin Linz »

Thanks. Apart from using a lathe I borrowed to do the foot pegs everything else was done at home.

Unfortunately circumstances have changed somewhat and I now need to get something I can use for daily commuting so it’s on ebay at the moment. It’s something I hate doing and I wish I could find an alternative, but as they say, dog doodie happens.
Cheers
Colin Linz
Post Reply

Return to “Bevel Head Twins Photo Gallery”