SS desmo cams in GTS motor

If you need technical information or help with your BOSCH ignition squarecase Ducati 900SS - Darmah engine - post your FAQs, comments & questions here.
Post Reply
dewcati
Cucciolo - the Lil Pup
Posts: 1
Joined: Fri Aug 24, 2012 7:13 pm

SS desmo cams in GTS motor

Post by dewcati » Tue Mar 13, 2018 10:27 am

Will the desmo cams from a 900SS fit into a 900GTS spring valve head ? I am currently rebuilding my 860 spring motor and just happened to have a set of SuperSport desmo cams.

wdietz186
888
Posts: 671
Joined: Sun Sep 10, 2006 4:40 pm

Re: SS desmo cams in GTS motor

Post by wdietz186 » Tue Mar 13, 2018 5:22 pm

They will physically fit but... The opening lobe is much thinner than the springer lobe and likely won't stand up to the loading imposed by the valve spring and the opening/closing events are rather sudden which in addition to wear would probably make a lot of noise. Also without having the pieces in front of me I think the rocker arm on the 860 will not line up with the lobe on center. If you really want the SS timing I think Megacycle has a re grind they can do on your cam, but you should also raise the compression for it to have any real benefit. Careful checking and setting the cam timing to the published figures will give you a noticeable performance improvement. Offset keys may be required to achieve the desired timing. If you get into it remember... The engine spins clockwise when viewed from the left side [backwards compared to the belt drive models].

ducadini
750 Sport [BEVEL]
Posts: 214
Joined: Sat Jul 31, 2004 8:54 am
Location: Antwerpen

Re: SS desmo cams in GTS motor

Post by ducadini » Wed Mar 14, 2018 10:49 am

I have a set SS cams that are "modified" for spring-use.
The holes in the closer-lobes are welded so all oil goes to the openers.
You will have to fit desmo-opener-rockers and they WILL wear fast.
You CERTAINLY won't be able to rev it to 8500 without risk with the standard springs. Don't know about special springs.

You can also drill the head for desmo rockers and fit a SS set :-D :-D

ciao
ducadini
Nego i ricordi peggiori
Richiamo i migliori pensieri

User avatar
BevHevSteve
SITE OWNER
SITE OWNER
Posts: 2120
Joined: Wed Mar 10, 2004 8:53 pm
Location: Lafayette, California
Contact:

Re: SS desmo cams in GTS motor

Post by BevHevSteve » Sat Mar 24, 2018 8:03 am

William dietz - your email account is bouncing....... please check into it and fix.
Image
Steve Allen (925)798-BEVL[2385] Ride'm, Don't Hide'm
Ducati/Euro Spares -> https://Store.BevelHeaven.com
Facebook > http://facebook.com/Bevel.Heaven
Twitter > http://www.Twitter.com/BevelHeaven

Post Reply

Return to “Squarecase BOSCH Ignition Engines > SD, SSD Darmah, late 900 SS & 900 GTS”