This is a question for UK or, possibly, European forum members.
I'm rebuilding a 'basket-case' 900SS engine and 3 out of 4 of the closing desmo rocker arms' heels have a pitted groove, presumably where the heel bears onto the cam profile - or wouldn't if they had been shimmed properly! (the cam lobes appear to be fine.)
There used to be a company in the US who would regrind the heels' profile and rebuild them with new hard chrome, stellite or whatever. However, I've been advised that the company is no longer doing this work. Bearing in mind that new rockers cost the proverbial arm-and-a leg, does anyone know of a reputable company accessible to the UK who might do this work.
I look forward to hearing from you.
Ciao,
Ian.
Desmo rocker arms - refurbishment
- Craig in France
- Paso 906
- Posts: 974
- Joined: Tue Mar 23, 2004 3:58 pm
- Location: Montpellier, France
Re-facing rockers
Hi Ian
Have you spoken to Tony Brancato?
Tony Brancato
Brancato Engineering
Unit 21b Monument Business Park
Warpsgrove Lane
Chalgrove
OXFORD OX44 7RW
(01865) 891203
Craig in UK
Have you spoken to Tony Brancato?
Tony Brancato
Brancato Engineering
Unit 21b Monument Business Park
Warpsgrove Lane
Chalgrove
OXFORD OX44 7RW
(01865) 891203
Craig in UK