Darmah front axle

If you need technical information or help with your BOSCH ignition squarecase Ducati 900SS - Darmah engine - post your FAQs, comments & questions here.
Post Reply
MitchB
Mariana
Posts: 35
Joined: Wed Sep 09, 2009 5:49 pm

Darmah front axle

Post by MitchB »

1981 SSD. Ready to re-assemble my front end, but it appears I'm missing a spacer..?

Is there a spacer on the axle between the fork and the wheel bearing on the (left) non speedo drive, side? I've looked at a few parts diagrams online, but can't find one with enough detail.

If one is needed - anyone have a spare?

Thx
MitchB
Mariana
Posts: 35
Joined: Wed Sep 09, 2009 5:49 pm

Answer

Post by MitchB »

There is indeed a spacer.

Amazing how far something can roll (finally found it) across the garage floor...
User avatar
Craig in France
Paso 906
Posts: 974
Joined: Tue Mar 23, 2004 3:58 pm
Location: Montpellier, France

Post by Craig in France »

Hi Mitch,

Glad you found it. For reference, here's a scan of the relevant bit of the parts book - piece #10, I believe.

SD front wheel

Ciao

Craig
Post Reply

Return to “Squarecase BOSCH Ignition Engines > SD, SSD Darmah, late 900 SS & 900 GTS”