SD900 Flywheel gear removal

If you need technical information or help with your BOSCH ignition squarecase Ducati 900SS - Darmah engine - post your FAQs, comments & questions here.
Post Reply
Ducrider52
Cucciolo - the Lil Pup
Posts: 11
Joined: Thu Oct 18, 2007 5:19 pm
Location: New Zealand

SD900 Flywheel gear removal

Post by Ducrider52 »

OK I give up. Can someone tell me in detail (I'm a bit slow :cry: ) how to remove the flywheel gear on my SD900 without buying the expensive 88713.0133 puller?
I tried modifying my 3 leg puller as someone suggested in this forum but as you all probably know there is not much room behind the gear. I made some leg feet for my puller that would fit behind the gear and had a fair bit of pressure on the puller before they bent but the gear won't budge. I stopped before I broke something. Any help would be much appreciated
04 800S
80 900SD Darmah
MartinMille BANNED
BANNED
Posts: 766
Joined: Fri Sep 21, 2007 8:15 pm

Post by MartinMille BANNED »

Ducrider52
Why don't you give Scott a call
Phone +64 (7) 548 0999 Fax +64 (7) 548 0246 he is at Tauranga [email protected]
I'm sure he can help you good luck Mate
Ducrider52
Cucciolo - the Lil Pup
Posts: 11
Joined: Thu Oct 18, 2007 5:19 pm
Location: New Zealand

Post by Ducrider52 »

Thanks Martin. I will do that
Regards
Reg
04 800S
80 900SD Darmah
Ducrider52
Cucciolo - the Lil Pup
Posts: 11
Joined: Thu Oct 18, 2007 5:19 pm
Location: New Zealand

Post by Ducrider52 »

Martin Mille / SSD wrote:Ducrider52
Why don't you give Scott a call
Phone +64 (7) 548 0999 Fax +64 (7) 548 0246 he is at Tauranga [email protected]
I'm sure he can help you good luck Mate
I gave Scott at Beveldrive in Tauaranga a call today. He told me that he is no longer doing any mechanical or engineering work and is only selling off the parts that he has.
Does anyone in New Zealand know of anyone that can do Ducati Bevel engine work? Preferably Auckland or at least the North Island.
Reg
04 800S
80 900SD Darmah
Scooter
Cucciolo - the Lil Pup
Posts: 1
Joined: Tue Mar 18, 2008 11:39 pm
Location: Canberra, Australia

Fly wheel gear removal

Post by Scooter »

Hi i seen to have the same problem its seems the flywheel gear has eaten into the woodruff key about .5mm and will not budge if u find an easy way tell me

Cheers

Scott
stanley

Post by stanley »

A guy named Bruce Telford is doing them apparently. He races a fair bit in BEARS etc.
Dont have any contact details unfortunately.

Dave.
Lumpy
SD900 Darmah
Posts: 329
Joined: Sun Mar 25, 2007 5:49 am

chain wrenches

Post by Lumpy »

I have found those Visegrip chain wrenches to be invaluable with this type of thing. They are a vise grip design with a chain that wraps around the 3 legs of the puller, adjust the wrench then snap them closed and it holds the legs of the puller hard up against the gear so the legs stay in as far as they can go and don`t allow the tangs at the end to bend. They are the kind of tool you only use once in a while, but when you do........
Post Reply

Return to “Squarecase BOSCH Ignition Engines > SD, SSD Darmah, late 900 SS & 900 GTS”