Is there a tool to remove..........

If you need technical information or help with your BOSCH ignition squarecase Ducati 900SS - Darmah engine - post your FAQs, comments & questions here.
Post Reply
bradp51
Cucciolo - the Lil Pup
Posts: 23
Joined: Thu Jan 12, 2012 8:29 pm
Location: Australia New South Wales

Is there a tool to remove..........

Post by bradp51 »

Gents
I have a Darmah and just trying to remove the screw in gland or bush that seals the ignition pick up wires on the clutch cover. I have removed the first locking ring but having problems with the larger one.

Any ideas appreciated.

cheers

User avatar
BevHevSteve
SITE OWNER
SITE OWNER
Posts: 2210
Joined: Wed Mar 10, 2004 8:53 pm
Location: Lafayette, California
Contact:

Re: Is there a tool to remove..........

Post by BevHevSteve »

take the clutch cover off and make sure that the sometimes present nut inside is removed.... Other than that, if you have the PLASTIC gland nut, unless it is leaking oil just leave it in place and replace the gland nut grommet only. Do know that if you snap that gland nut, I sell the components individually or a complete assembly, both the original style all black plastic ones and the newer ones that are brass painted black.

Click here to find the available options https://store.bevelheaven.com/index.php ... _str=gland
Image
Steve Allen (925)798-BEVL[2385] Ride'm, Don't Hide'm
Ducati/Euro Spares -> https://Store.BevelHeaven.com
Facebook > http://facebook.com/Bevel.Heaven
Twitter > http://www.Twitter.com/BevelHeaven

bradp51
Cucciolo - the Lil Pup
Posts: 23
Joined: Thu Jan 12, 2012 8:29 pm
Location: Australia New South Wales

Re: Is there a tool to remove..........

Post by bradp51 »

Steve,
Thank you for the reply. Appreciate the help.

cheers
Brad

Post Reply

Return to “Squarecase BOSCH Ignition Engines > SD, SSD Darmah, late 900 SS & 900 GTS”