identifing staschel rods

If you need technical information or help with your roundcase Ducati 750 engine - post your FAQs, comments & questions here.
Post Reply
pofflebot
Cucciolo - the Lil Pup
Posts: 14
Joined: Thu Mar 16, 2006 11:34 am

identifing staschel rods

Post by pofflebot » Thu Mar 16, 2006 12:03 pm

I have a pair of Staschel rods
The Gudgeon pin hole is 25mm the big end hole 48mm and they are 150mm between centres . I have been told they fit a roundcase 750 and/or a 450 desmo . Can anyone confirm this or tell me of other models . Would they fit my 81 900ss ?
Thanks in advance

User avatar
Eldert
Parallel Twin
Posts: 147
Joined: Tue Mar 16, 2004 2:08 am
Location: Netherlands

Post by Eldert » Fri Mar 17, 2006 5:22 am

your rods wont fit a 450 single . c.t.c. is 140 mm on a 450

roundcase is c.t.c. 150 mm 20 or 22 mm small end and 44mm bigend

900 SS is 145 mm c.t.c. and 20 mm small end

Eldert

pofflebot
Cucciolo - the Lil Pup
Posts: 14
Joined: Thu Mar 16, 2006 11:34 am

Post by pofflebot » Fri Mar 17, 2006 6:19 am

Hi
Thanks for that info . What do you think they are then ? the gudgeon pin hole could be bushed but the 48mm big end ?
Mike

Post Reply

Return to “Roundcase Engines > 750 GT, 750 Sport & 750 Super Sport”