750 GT Oil Screen Question

If you need technical information or help with your roundcase Ducati 750 engine - post your FAQs, comments & questions here.
Post Reply
youngjohn
Cucciolo - the Lil Pup
Posts: 1
Joined: Mon Sep 05, 2011 3:42 pm
Location: UK

750 GT Oil Screen Question

Post by youngjohn » Mon Sep 05, 2011 3:55 pm

Hello all, this is my first post.
I have recently acquired a 1974 750 GT and on changing the oil, I noticed that the end of the oil screen fitted is the longer, thinner (12mm) type. Within a box of spares included with the bike is another identical screen with the same thinner end.
On reading this forum it appears that the bike may need to be fitted with the shorter fatter (14mm) type. Can anyone shed any light on this? I'm just concerned that if it is incorrect, the oil may bypass the screen.
Thanks for any help.

baddean
Parallel Twin
Posts: 144
Joined: Sun Jun 17, 2007 6:11 pm
Location: Cincinnati Ohio

Post by baddean » Thu Nov 24, 2011 1:54 pm

Hey John,
This thread might be of some help.
http://www.bevelheaven.com/~BB/phpBB2/v ... umo+filter

Shorter/fatter type (14mm diameter x 8mm )
Longer/thinner (12mm diameter x 13mm).
The easiest way to check would be to remove the corresponding plug from the right side engine case and look to see how the filter tip fits.

There were three part numbers for the sump filter.
0755.88.125 Engine # 750.001-750.404 (approx)
0608.49.800 Engine #750.405- (approx)
0755.49.800 (no other info)
My information does not indicate what the dimensions are for these unfortunately.

Hope this helps,
Dean
Faster, faster until the thrill of speed overcomes the fear of death.
Hunter S Thompson RIP

Post Reply

Return to “Roundcase Engines > 750 GT, 750 Sport & 750 Super Sport”