Pre Load End Float

If you need technical information or help with your roundcase Ducati 750 engine - post your FAQs, comments & questions here.
Post Reply
User avatar
jonduc74
Cucciolo - the Lil Pup
Posts: 19
Joined: Tue Apr 24, 2007 4:55 am
Location: New Zealand

Pre Load End Float

Post by jonduc74 » Wed Apr 25, 2007 4:46 am

End Float
I understand that you have to “pre load” a GT750 motor by some thou to bring it in to zero end float when assembled, not sure what is the best amount, could someone help out there.
Also does anyone know if it is possible to remove “end float” from the crank by shimming between the casing and the flywheel, without have to split the cases?
Many Thanks John

User avatar
jonduc74
Cucciolo - the Lil Pup
Posts: 19
Joined: Tue Apr 24, 2007 4:55 am
Location: New Zealand

Re: End-Float

Post by jonduc74 » Thu Apr 26, 2007 2:57 am

Hi I have also posted this on “Motor & Transmission Shop” Please also look here to view replies,
Jonduc74

Post Reply

Return to “Roundcase Engines > 750 GT, 750 Sport & 750 Super Sport”