Introduction
Introduction
Good morning to BevelHeaven and all members. My name is Bob Balla from South Acworth NH. I have a few ducks to play with. My most-played-with currently is my '70 450R/T converted into a vintage roadracer many years ago by Tom Kerr. I have updated many features from engine to frame and raced it to the 500GP class championship with USCRA vintage club in 2009 and 2010. I took the 2011 season off to catch up on some home projects and plan to race again in 2012. I also have a recent addition of a 1980 Darmah which is currently on the table for a clutch refreshing with new fiber plates. Also pulled off the classic bonehead move of loosening the ignition pick-up attaching screw in the sidecover before referring to the manual. So a little questioning of friends found the proper tools for re-setting those pick-ups and the project continues while awaiting arrival of needed gaskets. Hope to have the bevel on road soon as the warm weather arrives.
- BevHevSteve
- SITE OWNER
- Posts: 2326
- Joined: Wed Mar 10, 2004 8:53 pm
- Location: Lafayette, California
- Contact:
Re: Introduction
Welcome aboard bob
Steve Allen (925)798-BEVL[2385] Ride'm, Don't Hide'm
Ducati/Euro Spares -> https://Store.BevelHeaven.com
Re: Introduction
Hi Bob, I'm doing a complete rebuild on a 79 Darmah. Curious where you got your gaskets and what you paid (I need all top and bottom gaskets).
Cheers
Cheers
- BevHevSteve
- SITE OWNER
- Posts: 2326
- Joined: Wed Mar 10, 2004 8:53 pm
- Location: Lafayette, California
- Contact:
Re: Introduction
https://shop.bevelheaven.com/detail.aspx?ID=143 complete gasekt and seal kit
https://shop.bevelheaven.com/detail.aspx?ID=76 top end only gasket and seal kit
Please support Bevel Heaven when you can........ Thank you
https://shop.bevelheaven.com/detail.aspx?ID=76 top end only gasket and seal kit
Please support Bevel Heaven when you can........ Thank you
Steve Allen (925)798-BEVL[2385] Ride'm, Don't Hide'm
Ducati/Euro Spares -> https://Store.BevelHeaven.com
Re: Introduction
sd900, I have all the bits I need ordered from Bevel Heaven, of course.
Re: Introduction
I'm making my shopping list now. Thanks.