On my 1972 750GT I have clutch judder (slipping & grabbing) when I set off from a standstill.
It feels like the clutch pressure plate is not lifting evenly.
Through the clutch inspection cover I have checked that the clutch spring screws are tight & the clutch pressure plate appears to be lifting evenly.
Could the clutch drum or plates be notched through wear & hanging up on each other, causing the problem?
Time to take the primary cover off for a look.
Clutch judder
- BevHevSteve
- SITE OWNER
- Posts: 2325
- Joined: Wed Mar 10, 2004 8:53 pm
- Location: Lafayette, California
- Contact:
Re: Clutch judder
yes - have a look there and, make sure the center nut holding the clutch basket on is super tight as well - these have a habit of backing out on lots of bikes it seems......
Steve Allen (925)798-BEVL[2385] Ride'm, Don't Hide'm
Ducati/Euro Spares -> https://Store.BevelHeaven.com
Re: Clutch judder
Both twins I have owned - an 860GT and a 900SS - have done that occasionally and I just came to accept it as normal.
Bruce
Bruce
1979 900SS
Fredericton, NB
Canada
Fredericton, NB
Canada