Oil drain plug crush washer size

Post your general FAQs, comments & questions regarding all Ducati engine & transmission restoration here. [Specific engine FAQs should go in the 'BevelHeaven Garage' section.]
Post Reply
drikko
Cucciolo - the Lil Pup
Posts: 8
Joined: Wed Apr 10, 2013 12:28 am

Oil drain plug crush washer size

Post by drikko »

Can someone tell me what size the oil drain plug (the one with the filter thingy on the back) crush washer size is so I can buy one before I take it out to change the oil? Mine appears to not be there at all and is leaking!

Thanks
machten
MHR / S2
Posts: 478
Joined: Sun Oct 29, 2006 8:37 am
Location: Perth, Western Australia

Re: Oil drain plug crush washer size

Post by machten »

From the SD 900 parts manual...

TAV13.18 0250.70.180 Washer - gasket id21 x od30 x 1.0 3

I measured one I have in a gasket kit and it is 27.8mm x 22.48mm x 1.06mm

Kev
drikko
Cucciolo - the Lil Pup
Posts: 8
Joined: Wed Apr 10, 2013 12:28 am

Re: Oil drain plug crush washer size

Post by drikko »

Awesome, thanks Kev :)
User avatar
geodoc
750 GT
Posts: 182
Joined: Thu Jul 18, 2013 3:57 pm
Location: Vancouver BC Canada

Re: Oil drain plug crush washer size

Post by geodoc »

If you're near a little airport, go into the Cessna parts dealer (or general light aircraft parts place) and get AN900-15 copper crush gaskets. Or get them from Aircraft Spruce online.
User avatar
BevHevSteve
SITE OWNER
SITE OWNER
Posts: 2324
Joined: Wed Mar 10, 2004 8:53 pm
Location: Lafayette, California
Contact:

Re: Oil drain plug crush washer size

Post by BevHevSteve »

we keep both aluminum and fiber M22 crush washers in stock.

Please support those who support you. `-*

Fiber
https://store.bevelheaven.com/engine-re ... m22-fiber/

Alloy
https://store.bevelheaven.com/engine-re ... -aluminum/
Image
Steve Allen (925)798-BEVL[2385] Ride'm, Don't Hide'm
Ducati/Euro Spares -> https://Store.BevelHeaven.com
Peter Mille
750 SS Greenframe - the holy grail
Posts: 500
Joined: Fri Aug 13, 2004 2:12 am
Location: The Netherlands, Europe.

Re: Oil drain plug crush washer size

Post by Peter Mille »

I'd go for aluminum....
User avatar
BevHevSteve
SITE OWNER
SITE OWNER
Posts: 2324
Joined: Wed Mar 10, 2004 8:53 pm
Location: Lafayette, California
Contact:

Re: Oil drain plug crush washer size

Post by BevHevSteve »

yes alloy for outside engine (sump screen, dipstick, engine bungs & gland nuts). The fiber ones are used on SOME plastic gland nuts, INSIDE your engine where there is a plastic nut INSIDE backing up the gland nut placed outside. I also use fiber washers on all outside places that have compromised threads along with teflon tape.
Image
Steve Allen (925)798-BEVL[2385] Ride'm, Don't Hide'm
Ducati/Euro Spares -> https://Store.BevelHeaven.com
blabber
Cucciolo - the Lil Pup
Posts: 7
Joined: Mon Nov 28, 2011 2:06 am

Re: Oil drain plug crush washer size

Post by blabber »

Drikko is in Australia,I doubt he will order a washer from the US.
Post Reply

Return to “Engine & Transmission Shop”