Hello group.
Looking for information regarding the ignition pickup cables as they exit the engine case. What kind of parts are involved ? All I have is the large nut. Previous owner filled the hole with silicone sealant, however I am interested in doing it the right way. Didn't find anything on Steve's website. I am familiar with the later style used in the 900SS and Darmah but this one is a different set up.
Cheers,
S
860 GT ignition pick up
- BevHevSteve
- SITE OWNER
- Posts: 2325
- Joined: Wed Mar 10, 2004 8:53 pm
- Location: Lafayette, California
- Contact:
Re: 860 GT ignition pick up
https://store.bevelheaven.com/index.php ... x=134&y=12
i have gland nuts - complete as well as the bits available separately.
i have gland nuts - complete as well as the bits available separately.
Steve Allen (925)798-BEVL[2385] Ride'm, Don't Hide'm
Ducati/Euro Spares -> https://Store.BevelHeaven.com
Re: 860 GT ignition pick up
Thank you Steve.
I thought the 860GT had a different arrangement. Will it be the same nut as the Bosch equipped engines ?
Thanks again
S
I thought the 860GT had a different arrangement. Will it be the same nut as the Bosch equipped engines ?
Thanks again
S
- BevHevSteve
- SITE OWNER
- Posts: 2325
- Joined: Wed Mar 10, 2004 8:53 pm
- Location: Lafayette, California
- Contact:
Re: 860 GT ignition pick up
You can compare part numbers in the 2 parts books. But I thought so... They might look different but are both M22 so this would work for both.
Steve Allen (925)798-BEVL[2385] Ride'm, Don't Hide'm
Ducati/Euro Spares -> https://Store.BevelHeaven.com
Re: 860 GT ignition pick up
Will do.
Thanks again. I appreciate it.
S
Thanks again. I appreciate it.
S