Tach drive coupling piece detail
- BevHevSteve
- SITE OWNER
- Posts: 2327
- Joined: Wed Mar 10, 2004 8:53 pm
- Location: Lafayette, California
- Contact:
Tach drive coupling piece detail
Here are some photos and a spec drawing of that funky little coupler piece inside your tach drive in case you need to make one...
Steve Allen (925)798-BEVL[2385] Ride'm, Don't Hide'm
Ducati/Euro Spares -> https://Store.BevelHeaven.com
- Craig in France
- Paso 906
- Posts: 974
- Joined: Tue Mar 23, 2004 3:58 pm
- Location: Montpellier, France
Re: Tach drive coupling piece detail
Ah - that's the little piece that likes to fall out and roll under the bench, yes? >:|!!!
Thanks Steve. Could be useful, hope it never is ...
Ciao
Craig
Thanks Steve. Could be useful, hope it never is ...
Ciao
Craig
- BevHevSteve
- SITE OWNER
- Posts: 2327
- Joined: Wed Mar 10, 2004 8:53 pm
- Location: Lafayette, California
- Contact:
Re: Tach drive coupling piece detail
Yes Craig, I bet you can figure out why I needed to make measurements of one then.... So I thought, since I had the info, I might as well post it.
Steve Allen (925)798-BEVL[2385] Ride'm, Don't Hide'm
Ducati/Euro Spares -> https://Store.BevelHeaven.com
- Craig in France
- Paso 906
- Posts: 974
- Joined: Tue Mar 23, 2004 3:58 pm
- Location: Montpellier, France
Re: Tach drive coupling piece detail
Ah, 'The Power of the Web', eh Steve? Good, init?BevHevSteve wrote: So I thought, since I had the info, I might as well post it.
Re: Tach drive coupling piece detail
Might want to do the same with the Oldham coupler for the shifter box too! They seem to disappear when things are apart for a while.
Re: Tach drive coupling piece detail
Amen to both bits!!! Amazing what nooks and crannies they can disappear, or rather, fit into!
Regards,
Regards,
RAD