Magneto removal

If you need technical information or help with your non bevel drive Ducati single cylinder Cucciolo, 2-strokes, the overhead valve and scooter motors - post your FAQs, comments & questions here.
Post Reply
McMichael
Cucciolo - the Lil Pup
Posts: 2
Joined: Fri Mar 24, 2006 5:27 pm

Magneto removal

Post by McMichael » Fri Mar 24, 2006 6:23 pm

I have a 1963 not sure of the model but it has a 125cc engine and while taking it apart for a rebuild, we couldn't get the magneto bolt to come out. is it a right or left handed thread and does it need a special tool to remove it?

User avatar
BevHevSteve
SITE OWNER
SITE OWNER
Posts: 2124
Joined: Wed Mar 10, 2004 8:53 pm
Location: Lafayette, California
Contact:

magneto

Post by BevHevSteve » Fri Mar 24, 2006 6:47 pm

Image
http://www.shop.bevelheaven.com/detail.aspx?ID=518

Click the link above for the right tool..... measure the magneto it is either 55mm or 62mm, I have both tools in stock.

I can;t remember the thread for the bolt, someone else will chime in soon I bet, thanks.
Image
Steve Allen (925)798-BEVL[2385] Ride'm, Don't Hide'm
Ducati/Euro Spares -> https://Store.BevelHeaven.com
Facebook > http://facebook.com/Bevel.Heaven
Twitter > http://www.Twitter.com/BevelHeaven

McMichael
Cucciolo - the Lil Pup
Posts: 2
Joined: Fri Mar 24, 2006 5:27 pm

Post by McMichael » Sat Mar 25, 2006 8:49 am

is there a specail tool to hold the magneto to remove the nut holding it on

User avatar
BevHevSteve
SITE OWNER
SITE OWNER
Posts: 2124
Joined: Wed Mar 10, 2004 8:53 pm
Location: Lafayette, California
Contact:

flywheel

Post by BevHevSteve » Sat Mar 25, 2006 2:56 pm

the clutch holding tool can keep the engine from spinning - I stock those as well - click TOOLS to see that on my shopping cart
Image
Steve Allen (925)798-BEVL[2385] Ride'm, Don't Hide'm
Ducati/Euro Spares -> https://Store.BevelHeaven.com
Facebook > http://facebook.com/Bevel.Heaven
Twitter > http://www.Twitter.com/BevelHeaven

Post Reply

Return to “Single Cylinder Non Bevel Drive Engines > Cucciolo, Scooters, Overhead Valve, 2-Stroke”