Bronco 98 v. 125 Pushrods
Posted: Mon Nov 26, 2018 10:13 pm
Hi All,
I'm having a time getting my pile of 98 Bronco parts into a running bike - I've rebuilt the lower end and gotten everything back together up to the top end. Now, unless something has gone horribly wrong, I'm finding the pushrods are about an inch too short for the rockers! I inherited this project with a carcass and miscellaneous parts from a 125 and I'm wondering if somehow the pushrods got mixed up.
Everything is mocked up, but seems to be seating fully, so I'm baffled as to why there's such a gap. Lifters and cam are in place, right tappets on the right sides, etc..
Does anyone know what the difference is in length between the 98 and 125 pushrods? These measure roughly 6" and 6 3/4".
Would like to confirm they're the wrong ones before I have some custom ones made- OEM are kinda hard to find.
Any ideas? Thanks in advance!
I'm having a time getting my pile of 98 Bronco parts into a running bike - I've rebuilt the lower end and gotten everything back together up to the top end. Now, unless something has gone horribly wrong, I'm finding the pushrods are about an inch too short for the rockers! I inherited this project with a carcass and miscellaneous parts from a 125 and I'm wondering if somehow the pushrods got mixed up.
Everything is mocked up, but seems to be seating fully, so I'm baffled as to why there's such a gap. Lifters and cam are in place, right tappets on the right sides, etc..
Does anyone know what the difference is in length between the 98 and 125 pushrods? These measure roughly 6" and 6 3/4".
Would like to confirm they're the wrong ones before I have some custom ones made- OEM are kinda hard to find.
Any ideas? Thanks in advance!